We are a well-known organization that is engaged in manufacturing, supplying and exporting a vast range of PTFE Components. The range offered by us is manufactured using excellent quality material that is sourced from most trusted and reliable vendors of market. All our products are known for their dimensional accuracy and fine finishing. In our range; we offer PTFE Gaskets, PTFE Washer, PTFE O Rings, PTFE Balls, PTFE Bellows, PTFE TRI Clamp Gaskets and PTFE U Seals.
Product Details:
Minimum Order Quantity | 12 Piece |
Size | Any |
Model No. | Parker, InventTef |
We are an eminent manufacturer, supplier and exporter of a PTFE Backup Rings. These rings are ideal to be used as backup rings in aerospace applications especially in the aerospace standard AS-568A uniform numbering system. Filled PTFE backup rings are apt for use in sealing systems that are frequently subjected to severe duty cycles or where pressures exceed 3,000 psi and temperatures are above275degrees Fahrenheit. Our products have a horde of special and high quality machine and molded teflon products like piston seals, buffer seals, seat seals, scrapers, valve seals and V packings for various industry requirements like aerospace, general fluid power industry, food & beverage industry equipment and pharmaceutical & medical sector.
DATA SHEET:
Compressibility | 350 bar 7%~9% |
Recovery | in 350 bar 7% |
Tensile Strength | 15Mpa |
Density | 2.2~2.4g/cm3 |
Pressure | 20Bar |
Temperature | -180°C~260°C centigrade |
Product Details:
Minimum Order Quantity | 12 Piece |
Size | any |
Brand | InTef |
Made available by us is an extensive array of PTFE O Rings. These rings are made for some of the critical applications where rubber/elastomer fail to give chemical resistance. We offer FEP encapsulated silicon and viton core o-ring for pumps and mechanical seal applications. These o-rings are made by matching PTFE bush to require cross section size. The offered rings are machined to close tolerance and surface is free from kick marks and burr.
Sizes Available: Any size as per standard American dash size, JIS, BS
Applications:
Pumps
Valves
Mechanical seals
Medical instruments
Ultra pure liquid handling systems
DATA SHEET:
Compressibility | 350 bar 7%~9% |
Recovery | in 350 bar 7% |
Tensile Strength | 15Mpa |
Density | 2.2~2.4g/cm3 |
Pressure | 20Bar |
Temperature | -180°C~260°C centigrade |
Product Details:
Minimum Order Quantity | 1 Kilogram |
Color | White, Black |
Thickness | 0-1 mm, 3-4 mm, 1-2 mm, 2-3 mm, 4-5 mm, >5 mm |
Size(FeetXFeet) | Standerd |
Feature | Wear Resisting |
Brand | Inventro |
We are an esteemed organization that is engaged in manufacturing, supplying and exporting a vast range of PTFE Sheets. These sheets are made using high strength PTFE suspend resin by methods of molding, sintering and finalizing the design to various sizes. Different filled products can satisfy all kinds of demand for instance. Compared with conventional expansion plates and rollers, PTFE slide pad has much more advantages and can accommodate expansion, contraction and other reciprocating motions of any structure.
Advantages:
PTFE has the lowest coefficient of friction of any known solid engineering material including lubricated metal
No maintenance is required
Requires no lubrication
Easily to install
Vibrations are dampened
Can etched (sodium), adhere to metal PTFE slide pad can be used in bridges and building,chemical, motorway, railway and so on the other applications
Characteristic of the products:
High tensile strength
high insulation
Corrosion resistance
Low friction
Abrasion resistance
Properties | Unit | Standard |
Tensile strength | MPa | ≥15.0 |
Ultimate elongation | % | ≥150 |
Apparent density | g /cm 3 | 2.1-2.3 |
Di-electric strength | KV/mm | ≥10 |
PTFE Molded Sheet Size:
Size | Options Available | |
Thickness | Width | Length |
1,2, 2.5, 3, 3.5, 4, 5, 6,7,8 | 300 | 300 |
9, 10, 12,15, 20,25,30, 35, | 600 | 600 |
40,45,50, 55, 60, 65, 70, | 1000 | 1000 |
75, 80,90, 100 ~~ |
Product Details:
Minimum Order Quantity | 12 Piece |
Dimension/Size | Customised |
Surface Finish | Chemical Resistant |
We are an eminent organization that is engaged in manufacturing, supplying and exporting a vast assortment of PTFE Washers. These washers are made from PTFE bush and PTFE rods. This washers are use for insulation, sealing or other mechanical applications. We have capability to machine PTFE washer at 3000 to 5000 pieces per 8hrs shift, from size mm od up to 32 mm od. Our range is machined at high speed and very close tolerance is achieved for critical applications. Washers are also made by punching/ pressing of PTFE sheet.
Sizes Available: (3 mm OD to 100 mm OD) x (1 mm ID to 100 mm ID)
Data Sheet:
Compressibility: 350 bar 7%~9%
Recovery in 350 bar 7%
Tensile strength: 15Mpa
Density: 2.2~2.4g/cm3
Pressure: 20Bar
Temperature: -180°C~260°C centigrade
Applications:
Automobile
Electrical appliance
Mechanical
Industrial
Construction
Household
Medical
Product Details:
Minimum Order Quantity | 5 Piece |
Thickness | 5mm |
Brand | Inventro |
We are a coveted organization that is involved in manufacturing, supplying and exporting high quality PTFE Gaskets. Available in various sizes and standards, these gaskets are made from PTFE bush, PTFE sheet, PTFE molded sheet or PTFE sheet by welded segments. It is composed of elastic materials such as compressed non-asbestos sheet and a PTFE envelope cover. It is used to seal pipe flanges glass lined, PVC or FRP. Low bolt torque effecting a seal and chemical compatibility is a main characteristic of this type of gasket.
Type of PTFE envelope gaskets:
V-type
U-type
L-type
Filler Material:
Non-asbestos compressed sheet
Asbetos compressed sheet
Application Areas:
Automobile
Electrical appliance
Mechanical
Industrial
Construction
Household
Medical
PTFE gasket
PTFE washers
PTFE sealing gasket
PTFE insulation gasket
PTFE machined gasket
Compressibility | 350 bar 7%~9% |
Recovery | in 350 bar 7% |
Tensile Strength | 15Mpa |
Density | 2.2~2.4g/cm3 |
Pressure | 20Bar |
Temperature | -180°C~260°C centigrade |